AIDAR Lab - Air Compressor
This acoustic dataset was collected on a single stage reciprocating type air compressor placed at the Department of Electrical Engineering Workshop. The signals are collected using…
Sensor and machine data for predictive maintenance, fault detection and quality control.
This acoustic dataset was collected on a single stage reciprocating type air compressor placed at the Department of Electrical Engineering Workshop. The signals are collected using…
The entire experimentation was performed with 3-AxisCNC EMCO Concept Mill 105. HSS twist drill bit of diameter 9 mm was used for drilling holes in the…
This dataset aims to identify operating faults in ventilation units with heat recovery. A total of 25 operating faults were deliberately induced across 6 Air Handling…
The dataset consists of data collected from heavy Scania trucks during their routine operations, focusing on the Air Pressure system (APS) responsible for generating pressurized air…
This dataset was introduced for the ESREL2020-PSAM15 conference. It was generated through simulation of an industrial system consisting of four identical components connected together, where the…
The AutoVI (Automotive Visual Inspection) dataset is distributed as 6 separate zip files on Zenodo, one per class, with normal training images and test images with…
Data collected fro an axial piston hydraulic pump. The rotation speed is set as 5280r/min and the corresponding spindle frequency is 88Hz.
In this dataset, from Baidu Inc., all samples were collected from the Seagate ST31000524NS, an enterprise-class hard disk model. The dataset comprises samples from 5,317 different…
In this renowned dataset, experiments were conducted utilizing a 2 HP Reliance Electric motor, where acceleration data was measured at locations both near to and remote…
The dataset contains 3 categories of industrial objects with both normal and anomalous samples. Each category includes RGB images and pixel-level ground truth masks for anomaly…
To generate this dataset, aging tests were conducted on several CS2 cell batteries with a rated capacity of 1100 mAh. All cells underwent identical charging procedures:…
The CALCE CX2 database was generated by conducting aging tests on CX2 cell batteries. These batteries have a rated capacity of 1100 mAh.
A series of machining experiments were conducted on 2" x 2" x 1.5" wax blocks using a CNC milling machine within the System-level Manufacturing and Automation…
This dataset originates from simulations conducted using the NASA turbofan engine simulator known as Commercial Modular Aero-Propulsion System Simulation (C-MAPSS). Within the simulation, the engine model…
This dataset is based on experiments conducted using a numerical simulator of a naval vessel (Frigate) equipped with a Gas Turbine (GT) propulsion plant. The simulator…
In this dataset, capacitors were subjected to electrical stress at three different voltage levels: 10V, 12V, and 14V. The dataset includes two types of data: Electrical…
This dataset focuses on assessing the condition of a hydraulic test rig using multisensor data. Four fault types (cooler, valve, pump, and accumulator) are introduced, each…
This dataset originated from a test bench composed of an induction motor, a flywheel, and three ball bearings. This setup enables the replication of various mechanical…
The dataset used in the publication "Data-driven prediction of battery cycle life before capacity degradation" comprises 124 commercial lithium-ion batteries subjected to failure under fast-charging conditions.…
The Genesis Demonstrator, initially developed during the OPAK Project and later refined in the European IMPROVE project, serves as a portable pick-and-place system utilizing an air…
The dataset was obtained from the Center for Intelligent Maintenance Systems (IMS) at the University of Cincinnati and originated from a run-to-failure experiment featuring four bearings…
The dataset, provided by Jiangnan University (JNU), encompasses three sets of bearing vibration data distinguished by different rotating speeds, all sampled at a rate of 50…
Kolektor Surface-Defect dataset for surface-defect detection, distributed by the ViCoS lab (see source page for content details).
The dataset was gathered from experiments conducted at the DIRG Lab within the Department of Mechanical and Aerospace Engineering at Politecnico di Torino. It includes bearings…
Sections
No section has this name. Press “Search” to search all site content.
Favourites
My results & certificates
My academy progressMy quiz resultsKids’ progressAcademy certificatesQuiz certificatesStart any lesson or quiz and it will show up here so you can get back to it quickly.
Settings
I am the explorer's assistant. Ask me about datasets by field or task, about their licences, sources and related papers, or ask me to compare two datasets.
Answers come from the explorer's database only; it never invents numbers or licences. What you type is not stored on the server.
The assistant can make mistakes, so check the attached sources.